Our entry includes a centered revolving door with people doors on either side. The path of travel from the people doors requires people entering to change directions toward the center of the room to avoid a wall that is less than 10' in front of the door. Can the primary direction of travel be a jagged line or is 10' clear in a single direction required?

Post a reply

emily reese moody

Sustainability Director, Certifications & Compliance

Jacobs

LEEDuser Expert

469 thumbs up

Fri, 07/14/2023 - 16:59

Yes, it's fine to change direction as long as the total travel distance is at least 10'. It's also OK to have the walkoff systems start on the exterior of the doors as long as the outside is reasonably protected from the elements, such as with an awning or other structure. It just needs to realistically be covered. A really high covering, for example, may not actually prevent rain or other elements from saturating a mat if the door is along the edge. Hope that helps.

Afogreen Build

www.afogreenbuild.com

Green Building Consultant

LEEDuser Premium Member

249 thumbs up

Wed, 03/13/2024 - 08:43

Hi Michelle,

Yes, agree with Emily.
As long as the route is in line with the direction of travel, it should be fine to work with. The LEED requirement is to place a permanent entryway system in the primary direction of travel. So, the change of mat direction due to wall should be applicable with making sure not to reduce the total travel to meet at least 10 feet as requested.

Best regards – Afogreen Build Team

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

You are currently logged in under an enterprise account

FAQs about EQc1 :

Non-linear primary direction of travel.

You rely on LEEDuser. Can we rely on you?

Add new comment