Under Table 1, revise last column to read "Exemplary performance or 1 additional point if only 2 points are achieved."
Under Paints and Coatings after the first sentence, add the following sentence: "To meet the 100% requirement for VOC content evaluation, a VOC budget may be used."
Under Paints and Coatings second sentence, add "wet-" prior to applied so it reads "wet-applied": and add the following sentence at the end Exclude foamed-in place and sprayed insulation (include in Insulation category).

Under Adhesives and Sealants after the first sentence, add the following sentence: "To meet the 100% requirement for VOC content evaluation, a VOC budget may be used."
Under Adhesives and Sealants second sentence, add "wet-" prior to applied so it reads "wet-applied".

Under Flooring, second sentence, add "raised flooring"
Under Flooring, third sentence, revise to "Exclude subflooring (include subflooring in the composite wood category, if applicable. Exclude wet-applied products applied on the floor (include in paints and coatings category). "

Under Wall panels, second sentence, add "interior and exterior" before doors, "wall" before frames, and "interior and exterior" before windows.
Under Wall panels, replace the third sentence with "Exclude cabinetry (include built-in cabinetry in the composite wood category and free-standing cabinetry in the furniture category), and vertical structural elements (include structural elements such as structural panels or structural composite wood in the composite wood category, if applicable). "

Under Ceilings, revise third sentence so it reads "Exclude overhead structural elements (include structural elements in the composite wood category, if applicable)."
Under Insulation, replace "material" in the second sentence with "product"
Under Insulation, revise third sentence with "Exclude insulation for HVAC ducts and plumbing piping from the credit. Insulation for HVAC ducts may be included at the project team’s discretion."

Under furniture, revise second sentence with " The furniture product category includes all seating, desks and tables, filing/storage, free-standing cabinetry, workspaces, and furnishing items purchased for the project. Exclude office accessories from the credit. "
Under Composite wood, replace second and last sentences with "The composite wood product category includes all particleboard, fiberboard (both medium density and thin), hardwood plywood with veneer, composite or combination core, and wood structural panels or structural wood products."

Under inherently nonemitting sources, revise so it reads "... and has no binders, surface coatings, or sealants that include organic chemicals. "
Under VOC emissions evaluation, delete "Option 1." from beginning of the first sentence.
Under VOC emissions evaluation, replace the fourth sentence with "Products used in any setting other than schools and classrooms must be modeled to private office scenario. For schools projects, modeling to office and/or schools scenario is permitted."
Under VOC emissions evaluation, replace the third paragraph with "The statement of product compliance must include the exposure scenario(s) used, the range of total VOCs, and must follow the product declaration guidelines in CDPH Standard Method v1.2-2017, Section 8. Manufacturer statements must also include a summary report from the laboratory that is less than 3 years old and the amount of wet-applied product applied in mass per surface area (if applicable). Organizations that certify manufacturers’ claims must be accredited under ISO/IEC Guide 17065. "

Delete Option 2.
Under VOC content evaluation, add "or a USGBC-approved third party" to the end of the second sentence and delete the last two bullets under Paints and Coatings and the last three bullets under Adhesives and Sealants.
Under Formaldehyde emissions evaluation, revise first two bullets so it reads: "Certified as ultra-low-emitting formaldehyde (ULEF) product under EPA Toxic Substances Control Act, Formaldehyde Emission Standards for Composite Wood Products (TSCA, Title VI) (EPA TSCA Title VI) or California Air Resources Board (CARB) Airborne Toxic Control Measure (ATCM)"
and second bullet: "Certified as no added formaldehyde resins (NAF) product under EPA TSCA Title VI or CARB ATCM"

Under formaldehyde emissions, delete "Tested per EN 717-1:2014 for formaldehyde emissions and complies with emissions class E1."
Under formaldehyde emissions, replace requirements for structural wood with two bullets: "Wood structural panel manufactured according to PS 1-09 or PS 2-10 (or one of the standards considered by CARB to be equivalent to PS 1 or PS 2) and labeled bond classification Exposure 1 or Exterior" and bullet two " Structural wood product manufactured according to ASTM D 5456 (for structural composite lumber), ANSI A190.1 (for glued laminated timber), ASTM D 5055 (for I-joists), ANSI PRG 320 (for cross-laminated timber), or PS 20-15 (for finger-jointed lumber)."

Under Furniture evaluation, add "or e3-2019e" after ANSI/BIFMA e-3-2014e and replace "If 75% of the furniture also complies with Section 7.6.3 in addition to 7.6.2, the category counts for exemplary level (90%). " with ", OR 7.6.2 AND 7.6.3 for one and a quarter credit, by cost."
Under Furniture, last sentence add IEC after ISO so it reads "ISO/IEC Guide 17065."