Our project is located on a Washington State DSHS-JRA Juvenile Rehabilitation Administration (Detention) Campus in Chehalis called Green Hill School. The project consists of two new commercial buildings replacing two obsolete buildings (demolished in this project). Both new buildings, Heath Center/Administration (HCA) and Intensive Management Unit (IMU), will be placed on the same site area (building footprint) as one of the obsolete buildings (Building \'X\'). Each new building footprint covers approximately 1/2 the existing footprint of the obsolete Building \'X\'. After the demolition of the 2nd obsolete building (Building \'W\'), this area and other disturbed areas will be restored with native/adaptive landscaping to create a green space. Only the HCA building will be pursuing USGBC recorded status of LEED Silver. The HCA building consists of a Health Center including medical, dental, and mental health services on the first floor and Administration offices on the second floor. This project will be completed in 3 phases, two bid packages and two separate Contractors. We are proposing one consistent LEED boundary that we will use for all the LEED credit. The entire project will have 3 different construction and TESC boundaries that will be different from the LEED boundary due to the phasing of demolition and construction and the inclusion of the IMU bldg (which is not pursuing LEED) in the construction boundary. Bid Pack #1 - Site Utilities and Demolition of Building \'X\' summer \'07 Bid Pack #2 - Phase I - New Construction of HCA & IMU building (in footprint of demolished bldg \'X\') spring to winter \'08 Phase II - Demolition of Bldg \'W\' and restoration of native/adaptive landscaping winter \'08/spring \'09 We could include 1/2 of Bldg \'X\' within our LEED boundary OR exclude Building \'X\' demolition from the LEED scope of work. We are planning to divert this demolition waste from the landfill, but the paperwork may be confusing with only 1/2 the building counting towards our LEED credits and the paper work from demolition of Building \'X\' will be from a different Contractor. Bldg \'W\' will be included in the LEED boundary and is in the same Bid Pack #2 that includes the new construction, although this demolition and restoration of landscape will be Phase II. Prior to demolition, a full hazardous material abatement would be completed to abate asbestos, mercury, and lead based paints. Demolition of building \'X\' and \'W\' would mostly consist of grinding up concrete into a rocky base coarse which would be used as base material along the perimeter road of the secured campus. Temporary stockpiling of soils from demolition of Building \'X\' and preparation of the site will be used to fill-in area of demolition of Building \'W\'. We propose that the LEED boundary for our HCA building would include half of the footprint of the demolished Building \'X" and the entire footprint of the demolished building \'W\' (excluding the other new building - IMU building which in located over the other 1/2 of Building \'X\'). The inquiry is: Is our proposal for our LEED boundary acceptable? Based on the LEED site boundary described above, is it permissible to have 3 different phased TESC boundaries and Construction boundaries beyond the one consistent LEED boundary for the HCA building? Is it permissible to calculate only the portion of the demolition of Bldg \'X\' which is in the LEED boundary toward MRc2 with the paper work being provided from a different contractor?