This CIR seeks clarification on whether tree canopy area can be counted in the area calculations for native/adaptive vegetation restoration. The project is a 500,000 SF mixed-use tower in a dense urban environment located on an infill, previously developed site. The site is bordered by bike lanes and light rail and is located within blocks of the city\'s mass transit hub. The project replaces an older 2-story building and the owner voluntarily dedicated the neighboring block (formerly surface parking) to the City to be developed into a park. This park is an extension of the City\'s "Park Blocks", which are natural areas that stretch from North to South through the City providing passive/active open space for people and birds. The project site area is 20,000 sf (full block) and the building footprint is approximately 18,000sf. Per SSc5.1, the required restored area is approximately 1,000sf. The project is adding street trees in the sidewalk. In plan, each tree canopy is shown to cover about 100 square feet. In this urban environment, avian species are the most common and the tree selection criteria balances code requirements, drought tolerance and capacity to support birds. The project will also include some vegetation on the upper floor terraces, the area of which is still being determined. Being located adjacent to the Park Blocks, the trees will provide some natural connection to these other heavily wooded areas in the City. When calculating "vegetated area", may I include any (or all) of the tree canopy area in the calculation of restored area?