LEED ND v4 MPR2 project area

wenting ding

Mechanical Engineer

NIKKEN SEKKEI LTD

LEEDuser Basic Member

0 thumbs up

Project location :

Japan

February 19, 2018

Hi,

In the MPR of LEED ND, it is written'Projects may have enclaves of non-project properties that are not subject to the rating system, but cannot exceed 2% of the total project area and cannot be described as certified'. Here does the toal project area mean the total floor area?

There are some buildings not belnging to the developer who will apply for the LEED ND, but for a continuous boundary line, we must include them into the boundary line.

Thank you.

Post a reply

Eliot Allen

LEED AP-ND, Principal

Criterion Planners

LEEDuser Expert

231 thumbs up

Tue, 02/20/2018 - 17:32

Wenting, the reference to 'project area' means project land area, measured in hectares or acres. In the case of existing buildings to be excluded, it is necessary to exclude the platted parcels on which they are located, so that the enclave boundary follows a platted property line, which is required of all project boundary lines. Eliot

wenting ding

Mechanical Engineer

NIKKEN SEKKEI LTD

LEEDuser Basic Member

0 thumbs up

Wed, 02/21/2018 - 00:24

Eliot, Thank you very much for your quick reply. Wenting