Can mezzanines open to floors below be excluded from the energy model?
How do I provide a zip code for an international location?
For a project outside the U.S., how do I determine the climate zone?
For a project outside the U.S., how do I determine the Target Finder score?
Do hotel rooms need automatic light shut-off control?
How commonly are the 90.1 mandatory compliance forms submitted as part of EAp2/EAc1?
The Section 9 space-by-space method does not include residential space types. What should I use?
Can the Passive House Planning Package (PHPP) be used to energy model for LEED?
A portion of our building envelope is historic. Can we exclude it from our model?
Which baseline HVAC system do I use if my building has no heating or air conditioning?
For an existing building, do I need to rotate the model?
Our project has a diesel backup generator. Should we include it in our energy model?
Can SHGC be higher in the proposed than in the baseline model?
Our process load is higher than 25%. Do we have to justify that?
Do I need to justify the electrical and fuel rates I am using in my model?
Our local code references ASHRAE 90.1-2010. Should I use that for my documentation, or 90.1-2007?
Forum discussion
CS-2009 EAp2:Minimum Energy Performance
Dear Marcus,
I wish to ask you regarding the Baseline Ventilation rate.
There is no space within this project with spaces >500 ft2 with people density 40/1000 ft2, however we still provide the DCV. The ventilation rate for proposed model is 30% more than the requirement in the ASHRAE 62.1.
My question, do we need to model the baseline ventilation rate same as the Proposed but without DCV?
Best regards,
Iqbal K.
LEEDuser is supported by our premium members, not by advertisers.
To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.