Forum discussion
NC-2009 EAp2: Minimum Energy Performance
Since eQUEST is unable to model dedicated outdoor air system linked to the radial panels, we modeled DOAS units by creating “dummy zones” within the model. Does this simulation method require an exceptional calculation or is it enough to explain it in the input summary report, attached to the EAp2 form?
Thanks.
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
A portion of our building envelope is historic. Can we exclude it from our model?
For an existing building, do I need to rotate the model?
Our process load is higher than 25%. Do we have to justify that?
Our local code references ASHRAE 90.1-2010. Should I use that for my documentation, or 90.1-2007?
Can mezzanines open to floors below be excluded from the energy model?
How do I provide a zip code for an international location?
For a project outside the U.S., how do I determine the climate zone?
For a project outside the U.S., how do I determine the Target Finder score?
Do hotel rooms need automatic light shut-off control?
How commonly are the 90.1 mandatory compliance forms submitted as part of EAp2/EAc1?
The Section 9 space-by-space method does not include residential space types. What should I use?
Can the Passive House Planning Package (PHPP) be used to energy model for LEED?
Which baseline HVAC system do I use if my building has no heating or air conditioning?
Our project has a diesel backup generator. Should we include it in our energy model?
Can SHGC be higher in the proposed than in the baseline model?
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5911 thumbs up
March 24, 2015 - 12:14 pm
Technically all work arounds are supposed to be performed as an exceptional calculation according to G2.5. We try to apply some common sense to whether exceptional calculations are needed or not. In this case an exceptional calculation does not make any sense. An exceptional calculation requires three models, baseline, proposed without and proposed with. If the model cannot model the situation I am not sure what your Proposed model without would model. With many situations like this there are acceptable work arounds that should be used, just explain the work around and cite the source.
FABIO VIERO
Head of SustainabilityManens S.p.A.
18 thumbs up
March 24, 2015 - 1:19 pm
Thank you so much Marcus!
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5911 thumbs up
March 24, 2015 - 1:35 pm
Grateful to be of assistance Fabio!