Hi,
In a Core and Shell model, for EAp2 (eQUEST), a LEED reviewer told me to define lighting and receptable loads meters. We have already defined the interior lighting in every space, so my doubt is if I define a sub-meter for this lighting consumption (with its power and schedule), we are counting it twice? How can I link a sub-meter to an already defined lighting. Nearly the same for the receptable loads. Thank you in advance!
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5907 thumbs up
August 8, 2014 - 2:09 pm
You would not count it twice.
First you create the sub-meter. Then assign it to a main meter. Within the thermal zone parameter box (air-side HVAC tab) or within the spreadsheet view you can then assign the load to the submeter.
Toni Herena Montull
Project EngineerAiguasol
4 thumbs up
September 9, 2014 - 4:34 am
Thank you Marcus, It works!