See all forum discussions about CS-2009 IEQc4.2
 Subscribe to new posts about CS-2009 IEQc4.2 Post a new question aboutCS-2009 IEQc4.2
See LEEDuser’s guidance on CS-2009 IEQc4.2»
FAQs about IEQc4.2 :

How should graphic arts paint or coatings be categorized?

The standards referenced for this credit have been updated since those listed in the LEED Reference Guide – does our project need to follow the latest SCAQMD Rules and Green Seal editions, or the ones listed in the reference guide?

How should handheld aerosol spray paints be handled?

What are the VOC limits for primers? They seem to be listed in both GS-11 and SCAQMD Rule 1113.

View answers »

Forum discussion

CS-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings

Anti-corrosive primer and paint on external metal elements

We need to apply an anti-corrosive primer and paint on metal elements, which are anchored into external face of main precast structure. These elements will not be visible from inside of the building, as they will carry elevation panels. Do we need to comply with GC-03 standard?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Fri, 05/16/2014 - 19:12

No, only "Paints and coatings used on the interior of the building (i.e., inside of the weatherproofing system and applied onsite) must comply with the following criteria as applicable to the project scope"

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.