Forum discussion
CI-2009 IEQc4.1: Low-Emitting Materials—Adhesives and Sealants
We are running into an issue with the stone counter top adhesive. The typical product that our sub uses is "Superior Gold Knife Grade" and it does not meet the limits. Any suggestions of products to use or how to get around this to still get the IEQc4.1?
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Do products applied to the weather barrier need to comply with VOC thresholds?
How do I determine what application my product falls under?
How is VOC % less water determined for aerosol adhesives?
Do grout and caulking need to be included, and if so, what is the application category?
John-David Hutchison, LEED AP BD+C, PMP
Sustainability ManagerBGIS
LEEDuser Expert
166 thumbs up
April 16, 2014 - 2:46 pm
#1 - request your sub asks his suppliers for other options, SCAQMD has been around long enough that there is almost always a quality product that will meet the limits.
#2 - see VOC budget above.
Good Luck!
Meredith Park
TurelkApril 28, 2014 - 4:42 pm
Would you use the same limit as ceramic tile for the solid surface counter top (65g/L)?
John-David Hutchison, LEED AP BD+C, PMP
Sustainability ManagerBGIS
LEEDuser Expert
166 thumbs up
April 29, 2014 - 8:31 am
Good question! I would start with what is the adhesive you are using; my guess is that it would more likely fall into the "Multipurpose Construction Adhesives - 70 g/l max.