See all forum discussions about EBOM-2009 IEQp1
 Subscribe to new posts about EBOM-2009 IEQp1 Post a new question aboutEBOM-2009 IEQp1
See LEEDuser’s guidance on EBOM-2009 IEQp1»
FAQs about IEQp1 :

We have a VAV system where single AHUs serve multiple zones. Do we need to take outside air measurements at each VAV box?

What if after our Preliminary Review we have to re-work the ventilation rate procedure calculations and find that we need to make corrections to the system in order to meet the prerequisite? Can we redo the outside air testing after making corrections? Wo

What if our systems do not meet the required outside air when systems are tested at worst-case conditions?

Our building has a single fan that supplies outside air to multiple AHU’s. Do we need to perform outside air testing at the supply fan or at all AHUs?

View answers »

Forum discussion

EBOM-2009 IEQp1:Minimum IAQ Performance

Local code more stringent than ASHRAE 62.1

Default Avatar
Andrew Tse
LEED Project Engineer
Lilker EMO Energy Solutions
LEEDuser Basic Member
2 thumbs up

I noticed that the LEED EBOM form does not have the same compliance path as LEED-NC, which allows you to document that your building complies with local code that is more stringent than ASHRAE 62.1. Has anyone ever tried the "local code" compliance path for an EBOM project?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Tue, 04/01/2014 - 16:09

Hello Tom, I have not done an EBOM project, but proving local code is more stringent than ASHRAE 62.1 is quite a pain. If you are challenged, the reviewers will ask you have to analyze your project using both methods and identify the most stringent conditions. This might appear to mean doing a side-by-side analysis on a space-by-space and a system-by-system basis. But, on the single occasion where a reviewer challenged me about local code for ventilation, I did not provide a side-by-side analysis. I provided two separate analyses which each showed compliance. A side-by-side analysis doesn't really prove anything because the calculation methodologies and assumptions used are often very different--apples and oranges.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.