See all forum discussions about NC-2009 MRc2
 Subscribe to new posts about NC-2009 MRc2 Post a new question aboutNC-2009 MRc2
See LEEDuser’s guidance on NC-2009 MRc2»
FAQs about MRc2 :

Oops! Our trash was measured by both weight and volume at different times. How do I standardize this?

The waste management facility we are using is providing us with monthly documentation specific to our waste, showing 80% diversion. They also have a published, facility-wide rate of roughly 20%, and they have no published rate for construction waste. Will

How is construction waste accounted for when utilizing off-site construction, like modular construction or pre-fabrication of assemblies?

How does MRc2 work for projects pursuing a campus approach, or any project where waste management will be shared with other construction projects?

Can materials that have been unused and returned to the manufacturer as part of a “take-back” program contribute to the credit?

Should I include hazardous material such as lead-based paint in MRc2 calculations?

Should household-type trash from workers' lunches and office use be included in MRc2 diversion and calculations?

Can sending material to waste-to-energy plants count toward MRc2?

The requirements of this credit say that land-clearing debris does not contribute to the percentage of materials diverted from the landfill. What exactly is considered "land clearing debris"?

View answers »

Forum discussion

NC-2009 MRc2:Construction Waste Management

Furniture Packaging Waste

Our client is purchasing new furniture for a newly constructed building. We're using the LEED NC 2009 rating system. Although small compared to the rest of the waste produce on the project, should the waste generated from the furniture packaging (e.g. plastic, styrofoam) be included in this credit?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Default Avatar
LEEDuser Expert
472 thumbs up

Mon, 09/30/2013 - 15:36

Gavin - Sorry for my delay in responding. I was away from e-mail for a week. I have typically included waste generated on site until the contractor has removed the dumpsters from the project. So, if furniture arrives while the dumpsters are still on site then I would include the waste in the calcs. If, however, the dumpsters are gone, then I wouldn’t include it. I don’t think there is a hard and fast rule - but keeping the waste out of the landfill is the overall goal - whether or not it contributes to earning MRc2.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.