See all forum discussions about CS-2009 IEQc4.3
 Subscribe to new posts about CS-2009 IEQc4.3 Post a new question aboutCS-2009 IEQc4.3
See LEEDuser’s guidance on CS-2009 IEQc4.3»
FAQs about IEQc4.3 :

On a renovation, should flooring that is previously installed be subject to the credit requirements?

One flooring adhesive we are using falls under both IEQc4.1 and IEQc4.3, and is over the VOC limit. We are using the VOC budget method to meet IEQc4.1 requirements, but are we automatically disqualifed from IEQc4.3?

The credit requirements are allowed to exempt unfinished wood flooring from the credit requirements, but wood flooring is almost always finished. This is confusing!

I have an international project and my flooring products aren’t tested using any of the above standards. How can I tell if they still comply?

If I have no flooring products in the scope of my project, can I earn this credit?

How do I handle a polished concrete floor?

Should mineral-based finish flooring products (without any integral organic-based coatings and sealants) and unfinished/untreated solid wood flooring be documented on the IEQc4.3 LEED Online form, even though they are exempt from certification requirement

View answers »

Forum discussion

CS-2009 IEQc4.3:Low-Emitting Materials—Flooring Systems

Minimum floor area requirements for EQc4.3?

For C&S project the main floor surface for common areas is specified as natural stone (granite), which I understand is not considered for this credit. The other floor surfaces are those for service areas like Recyclable storage, administrator office, changing rooms, etc. Service areas add a small amount of floor compared with the building size, Is there a minimum floor surface area to be elegible for this credit?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Mon, 03/11/2013 - 02:18

Hi Samuel, There is not a minimum amount of floor surface area required to comply with the credit. Lauren

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.