See all forum discussions about EBOM-2009 IEQp1
 Subscribe to new posts about EBOM-2009 IEQp1 Post a new question aboutEBOM-2009 IEQp1
See LEEDuser’s guidance on EBOM-2009 IEQp1»
FAQs about IEQp1 :

What if after our Preliminary Review we have to re-work the ventilation rate procedure calculations and find that we need to make corrections to the system in order to meet the prerequisite? Can we redo the outside air testing after making corrections? Wo

What if our systems do not meet the required outside air when systems are tested at worst-case conditions?

Our building has a single fan that supplies outside air to multiple AHU’s. Do we need to perform outside air testing at the supply fan or at all AHUs?

We have a VAV system where single AHUs serve multiple zones. Do we need to take outside air measurements at each VAV box?

View answers »

Forum discussion

EBOM-2009 IEQp1:Minimum IAQ Performance

Value input for “Measured outdoor airflow, CFM”

In this prerequisite we are following Case 1 and filling in details in the 2007UM-62MZ Calculator. Further, filling in the online template column 3 in Table IEQp1-2 requires “Measured outdoor airflow, CFM”. I am not able to identify which value has to be input for this column in the 2007UM-62MZ Calculator, which is the cell? Thank you.

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Profile picture for user Dave.Hubka_2
Dave Hubka
Practice Leader - Sustainability
EUA
LEEDuser Expert
510 thumbs up

Thu, 02/28/2013 - 22:46

It's near the top of the "Vot Calculation" tab. The row colored green and is titled "Outdoor air intake provided for system".

Fri, 03/01/2013 - 08:40

I have not asked you for the "required outdoor air intake flow (Vot)", I have asked for the "Measured outdoor airflow (cfm)", Can you tell me the cell I have to input in the column with that name in the Table IEQp1-2?
Profile picture for user Dave.Hubka_2
Dave Hubka
Practice Leader - Sustainability
EUA
LEEDuser Expert
510 thumbs up

Fri, 03/01/2013 - 13:05

Hello Patricia. You'll need to download the "USGBC LEED 62MZCalc (May 2011)" found at: http://new.usgbc.org/resources/usgbc-leed-62mzcalc The "2007UM-62MZ" is not the complete calculator. The complete LEED 62MZ calculator is also available for download on LEED Online as one of the credit resources of IEQp1. It's titled "USGBC+LEED+62MZCalc+(May+2011).xls" Hope this helps. Dave

Tue, 04/16/2013 - 08:04

I have downloaded the "USGBC LEED 62MZCalc (May 2011) and I have to complete manually the cells that correspondons to the "Inputs of the system" In the "2002UM-62MZ" calculator I do not have to do this because this cells give me an average value of the As, Ps and Vpsd. What I have to do? I have submitted this prerrequesite with the "2002UM-62MZ" calcualtor and the review team have not told me nothing about the calculator version in the review report, so could I submit with this version? Besides, Do I have to leave the calculator in "IP" units mode or can I leave it in "SI"? Thank you very much.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.