See all forum discussions about NC-2009 MRc2
 Subscribe to new posts about NC-2009 MRc2 Post a new question aboutNC-2009 MRc2
See LEEDuser’s guidance on NC-2009 MRc2»
FAQs about MRc2 :

How is construction waste accounted for when utilizing off-site construction, like modular construction or pre-fabrication of assemblies?

How does MRc2 work for projects pursuing a campus approach, or any project where waste management will be shared with other construction projects?

Can materials that have been unused and returned to the manufacturer as part of a “take-back” program contribute to the credit?

Should I include hazardous material such as lead-based paint in MRc2 calculations?

Should household-type trash from workers' lunches and office use be included in MRc2 diversion and calculations?

Can sending material to waste-to-energy plants count toward MRc2?

The requirements of this credit say that land-clearing debris does not contribute to the percentage of materials diverted from the landfill. What exactly is considered "land clearing debris"?

Oops! Our trash was measured by both weight and volume at different times. How do I standardize this?

The waste management facility we are using is providing us with monthly documentation specific to our waste, showing 80% diversion. They also have a published, facility-wide rate of roughly 20%, and they have no published rate for construction waste. Will

View answers »

Forum discussion

NC-2009 MRc2:Construction Waste Management

Reporting Recycling

Default Avatar
Samantha Nourse
Assistant Project Manager
Perini Management Services, Inc.
LEEDuser Basic Member
2 thumbs up

Hi, I am working on the forms for submitting credit MR2 as our project has come to a close. I have the proper documentation from the waste management company, which specifies, by month and by each specific haul date, the amount (in tons) of debris, the amount recycled, and the recycle rate per pick up. When filling out the form, should I be entering each haul as a separate line item? Or should I combine it by month? Or should I combine it by type sent to each place? The project had about 10 waste pickups per month, over 2 years, so that would be a lot of line items on the form. Please advise! Thanks.

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Default Avatar
LEEDuser Expert
472 thumbs up

Fri, 12/14/2012 - 13:18

I typically summarize quantities by material - cardboard, metals, brick/block, landfilled waste, etc. to show a total for each type of material collected/tracked. If I have a material that was diverted to two different locations or that was collected by two different haulers, then I separate those materials so I can differentiate them on the MRc2 form.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.