See all forum discussions about CI-2009 IEQc4.2
 Subscribe to new posts about CI-2009 IEQc4.2 Post a new question aboutCI-2009 IEQc4.2
See LEEDuser’s guidance on CI-2009 IEQc4.2»
FAQs about IEQc4.2 :

What are the VOC limits for primers? They seem to be listed in both GS-11 and SCAQMD Rule 1113.

How should graphic arts paint or coatings be categorized?

The standards referenced for this credit have been updated since those listed in the LEED Reference Guide – does our project need to follow the latest SCAQMD Rules and Green Seal editions, or the ones listed in the reference guide?

How should handheld aerosol spray paints be handled?

View answers »

Forum discussion

CI-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings

Flat and non-flat

I want to appologize if the answer on my question is to obvious but I currently have a language problem: 1. Here "flat" is meant in terms of brilliance / glossy? 2. Where is the limit/border between flat and non-flat paints. Typically there are different levels of brillance. So how do you distinguish if it is flat or non-flat?

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Profile picture for user emilycatacchio
Emily Catacchio
Sustainability Specialist
Wight and Company
LEEDuser Basic Member
415 thumbs up

Sun, 08/26/2012 - 21:16

Flat means no gloss. Flat = Matte.

Mon, 08/27/2012 - 07:25

Thanks for the answer. The last queston is how to treat "semiflat" colors (e.g. "silk gloss", "satin gloss")?
Profile picture for user davidp
David Posada
Integrated Design & LEED Specialist
SERA Architects
LEEDuser Expert
1361 thumbs up

Tue, 08/28/2012 - 17:03

There are some footnotes after the appendix of GS-11 regarding the "specular gloss level at 60i" that is determined by ASTM-D523-89 Standard Test Method for Specular Gloss. Flat paints register less than 5, non-flats are greater than 5. You may need to dig into the product literature or contact the manufacturer to find out the specular gloss level of your paint, but that should define the theshold between non-flat and flat if the name is unclear.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.