We are reviewing a project for LEED certification (v 2.2) that was designed and constructed by another firm. There are documentation and template form issues with the Recycled content/Regional credits-we are trying to figure out the best way to correct the errors since the contractor is no longer in the picture and we probably can't get them to revise their information.
Is possible for us to 'redo' the contractor forms ourselves? We have access to the submittal and cost information and can get additional documentation info from the manufacturer. The contractor''s LEED consultant signed all their forms so we are hoping it wont an issue if our names are on the form instead. If anyone has had any experience with this your thoughts on the issue would be appreciated.
Thanks!
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
TODD REED
Energy Program SpecialistPA DMVA
LEEDuser Expert
889 thumbs up
June 29, 2012 - 1:43 pm
If you can get yourselves assigned as manager or administrator you can complete the form with your information and make the changes. I have done this quite often when it is easier for myself to make the corrections then it is to chase down a contractor who is already at the next job. I've never had an issue with my information being on the template and not the contractor noted in the team admin section.
Elle Brown
28 thumbs up
June 29, 2012 - 2:15 pm
thanks for your response-This is very helpful!