See all forum discussions about NC-2009 WEp1
 Subscribe to new posts about NC-2009 WEp1 Post a new question aboutNC-2009 WEp1
See LEEDuser’s guidance on NC-2009 WEp1»
FAQs about WEp1 :

We provided new showers in our project to comply with the alternative transportation credit. Should they be considered in WEp1 calculations?

Can you explain the 12-second duration for metering faucets?

Can I use a nonpotable water source to contribute to WEp1 compliance?

Our project does not have any eligible water fixtures in the project boundary. Can we comply with WEp1?

We are having trouble finding EPAct-compliant fixtures. Is that a problem?

Where can I find a clear meaning of "public" and "private" as relevant to lavatory faucets?

Our project is a factory with historically a 95% male workforce. The restroom design accounts for this. Can I argue that the male/female gender ratio is different than 50/50?

Are shower duration controls an acceptable water-saving strategy?

Can I include process water savings in order to earn an Exemplary Performance point?

Will the reviewers accept a spreadsheet as a plumbing fixture schedule in lieu of the plans from the Construction Documents?

In LEED review comments I've been referred to the Water Use Reduction Additional Guidance document. I didn't know this was a required reference document.

Should I include bar sinks? What about mop sinks or janitor sinks? Swimming pools? Safety showers? Bidets? Tub spouts?

View answers »

Forum discussion

NC-2009 WEp1:Water Use Reduction—20% Reduction

Water consumption for Hotel Kitchen Sink

We are working on a hotel project and encountered some qns: 1. Kitchen Sink faucet There is no kitchen in the hotel room but kitchens for restaurants. two scenarios: (1) washing hands etc. (2) pre-rinse food etc (with retractable hose) --> Do we need to account for both (1) and (2) for the water consumption? I believe the default Fixture Usage only account for (1)? 2. Pre-rinse Valve If the item (2) above should be considered under this category, are we suppose to propose a reasonable usage? (I realized the usage is not automatically populated). Thank you. BT

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Tue, 05/22/2012 - 15:50

Hi, 1. Best guidance for this is in LEED CI for Retail. "Appliances and equipment that use water for human consumption may be excluded like among other things fixtures used to fill sinks for washing produce. Fixtures whose flow rates are regulated by health codes may be excluded. Example: fixtures used for filling dishwashing sinks." So we include hand washing sinks at normal commercial/public rate and limit their usage group to staff and exclude the other restaurant sinks. 2. Commercial pre-rinse valves are to be 1.6gpm or less. I'm not sure what happens in NC. But if you enter a flowrate greater than that in the box provided in CI Retail, the Prerequisite will not achieve compliance. I assume the gpm is available on the cutsheet as it is on most other plumbing fixtures.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.