Forum discussion

IEQp2 - EBO+M

Recently, IEQp2 for EBO+M projects are also requiring additional documentation that is not clearly requested in reference guide or on LEED Online. The issue is that most existing buildings already have 'no smoking'' signage on doors at exterior entries. This used to be acceptable to use existing signage. Now, the reviewers are requesting that we show photos of EVERY entry and that the signs MUST state 'No smoking with 25 feet of building.' I'm glad to see that this is explicit in the draft rating system for 2012. Even going so far as to specify the sign must be posted within 1- feet of entry.

1

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Thu, 04/12/2012 - 21:35

Hi again - This prerequisite requires a smoking policy and a method of communicating that policy to all building occupants, both FTEs and visitors. The most comprehensive way of demonstrating prerequisite compliance would be a written policy that is provided to FTEs and signage at all entries roughly stating “No smoking within 25 feet.” However, existing signage that only says “No Smoking” - with no specification of distance – does meet current prerequisite requirements. Similarly, while signage can be at main entrances and any exits where the building management has observed violations, there is not an explicit requirement that signage be placed at every entrance. If your projects appears to have been assessed by more stringent standards, please let us know by selecting “Questions about Review Comments” on our Contact Page: http://www.gbci.org/org-nav/contact/Contact-Us/Project-Certification-Questions.aspx. In this instance though, I will contact you offline to follow up. And thank you for noting that project teams should be aware that these requirements may become more strict in the next version of the rating system! Megan R/S

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.