See all forum discussions about NC-2009 SSc4.2
 Subscribe to new posts about NC-2009 SSc4.2 Post a new question aboutNC-2009 SSc4.2
See LEEDuser’s guidance on NC-2009 SSc4.2»
FAQs about SSc4.2 :

Our building is mostly residential. Must we provide showers and changing rooms for the nonresidential portion?

Does LEED have any requirements on spacing or the type of bike racks used? What about security?

Are there specific requirements for the changing rooms, such as size?

Based on my FTE calculations, I am only required to provide 1 shower to meet this requirement. Since both males and females will have access to this one shower, and it will be in a single room, does this satisfy the credit requirements? Can I use an exist

Do bike racks have to be within the LEED project boundary?

My project type serves visitors who can reasonably be expected to not be using bikes, e.g. hotel, airport, assisted living facility. Can I exclude them from bike rack requirements?

Is a general storage room that is accessible to residents acceptable for covered bike storage?

Do I round up or down? What if the calculations show that I need 0.5 showers?

View answers »

Forum discussion

NC-2009 SSc4.2:Alternative Transportation—Bicycle Storage and Changing Rooms

Existing shower facilities used for previous LEED certification

Our project site has a sufficient changing/shower facility that is existing in another building that also achieved LEED certification, including this point. If that changing facility is located within the 200 yards of our building entrance, but it was used to achieve a previous certification, can we still apply it to our point as well?

3
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Profile picture for user davidp
David Posada
Integrated Design & LEED Specialist
SERA Architects
LEEDuser Expert
1361 thumbs up

Wed, 11/23/2011 - 18:20

Possibly - if the number of showers is 0.5% of the FTE of both buildings combined, then it is adequate to serve both buildings. If it only has enough showers to serve the FTE of one building, than it can only be used for one building's certification.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.