See all forum discussions about NC-2009 EAp2

Subscribe to new posts about NC-2009 EAp2 Post a new question aboutNC-2009 EAp2

See LEEDuser’s guidance on NC-2009 EAp2»

FAQs about EAp2 :

Can the Passive House Planning Package (PHPP) be used to energy model for LEED?

Is it acceptable to model a split-type AC with inverter technology compressor as a heat pump, like modeling VRF?

Can the Trace 700 'LEED Energy Performance Summary Report' by uploaded to LEED Online in lieu of the Section 1.4 tables spreadsheet?

A portion of our building envelope is historic. Can we exclude it from our model?

Which baseline HVAC system do I use if my building has no heating or air conditioning?

For an existing building, do I need to rotate the model?

Our project has a diesel backup generator. Should we include it in our energy model?

Our project has a large process load—75%. Despite our efforts to make an efficient HVAC design, the cost savings are minimal. What can we do to earn this prerequisite and be eligible for LEED certification? Is there any flexibility in how we model the p

Can SHGC be higher in the proposed than in the baseline model?

Our process load is higher than 25%. Do we have to justify that?

Do I need to justify the electrical and fuel rates I am using in my model?

Our local code references ASHRAE 90.1-2010. Should I use that for my documentation, or 90.1-2007?

Can I claim exterior lighting savings for canopy lighting even though a baseline model cannot include shading elements?

The project is built on a site with existing exterior lighting installed. How should this be accounted for?

Can mezzanines open to floors below be excluded from the energy model?

How do I provide a zip code for an international location?

For a project outside the U.S., how do I determine the climate zone?

For a project outside the U.S., how do I determine the Target Finder score?

Do hotel rooms need automatic light shut-off control?

How commonly are the 90.1 mandatory compliance forms submitted as part of EAp2/EAc1?

View answers »

Forum discussion

NC-2009 EAp2:Minimum Energy Performance

Design Submission - Table 1.8.1

Erika Duran

Sustainability Consultant

Dagher Engineering

LEEDuser Basic Member

51 thumbs up

February 4, 2011

We're working on a Residential Project, after the design submission the certification body told us that It was not clear if the Baseline case fan power was modeled correctly. They want us to provide clarification and to report the revised total fan power in KW in Table 1.4, and update the Table 1.8.1 and simulation summary reports to reflect the changes. Does anyone know what Table 1.8.1 refers to? Thank you for your help and prompt response

Post a reply

David Hubka

Director of Operations

Transwestern Sustainability Services

LEEDuser Basic Member

355 thumbs up

Fri, 02/11/2011 - 22:36

Table 1.8.1 refers to the EA Credit #1 online template. LEED user contains a spreadsheet that auto-calculates the baseline fan power consumption. Be sure to use this method for baseline supply, exhaust, relief and return fans.Baseline fan powered VAV boxes are excluded from this method.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.