Does anyone have any advice on reporting controller efficiency on the LEED templates? The reference guide says to "determine, if applicable, the CE..." Yet, if you don't think it's applicable there is no way to indicate that on the template. You have to upload something for the form to read as complete.
We are using a drip irrigation system that does not use weather based controls or sensor-based systems. We've contacted the manufacturer and they don't really have an answer for us. Is there any type of standard CE to use? For now we're just using "1" but I'm not sure if this is acceptable.
Shannon Gray
ConsultantYRG sustainability
228 thumbs up
August 30, 2010 - 10:45 am
Hi Annette,
You are correct with inputting "1" for your CE number. If you input 1 you should not have to upload any supporting documents. If you use any number other than 1 you would need to include supporting documents.
Best,
Shannon
Puteri Shireen Jahnkassim
consultantEAG Consulting Sdn Bhd
42 thumbs up
May 4, 2011 - 1:25 pm
Hi Tristan
Same with the case of Anette above, we are specifying a drip irrigation system that is controlled manually - it does not have an automatic system or a sensor system
Does this qualify to obtain the water savings and if so, is the controller efficiency to input taken based on ' drip irrigation' in the reference guide?