This set of annoatated photometric plans was created by Bill Swanson, P.E. for LEEDuser as a teaching tool for SSc8 documentation issues. They are not intended as examples of actual documentation, though a lot can be learned from them. These documents include a detailed plan showing a compliant site with light levels in the site and as required around the boundary, with advice and useful tips. The fixture comparison document is a means to better understand and compare the spill light from different light fixtures and placements. Think of the purple line as the edge of a cutout with a pin thru the paper where the pole is.  Move the cutout over the site when locating poles, if the cutout overlaps the line beyond the property line then that fixture cannot be located and aimed as placed. The driveway entrance example shows the impact of fixture placement around driveway entrances, and the special allowance for the site boundary around those entrances.