The performance of LEED buildings following certification is emerging as an important point of study. Data must not simply be gathered, but gathered and processed in a manner that allows meaningful comparison between predicted and actual energy performance. EA Credit 5, Measurement & Verification (M&V), addressed that need in principle. However, EAc5 was limited in that its IPMVP based protocol was never intended for use in LEED. The credit has been redeveloped into a mechanism that directly addresses the building performance needs of LEED.
Additional Questions
- Were there barriers to implementing the strategies used under this credit?
Credit Submittals
General
- Register for Pilot Credit(s) LEEDuser.com, and participate in online forum
- Submit the feedback survey using the link on the USGBC.org credit page; supply PDF of your survey/confirmation of completion with credit documentation
Credit Specific
Note: As the pilot continues, requirements and submittal requirements will evolve. Please submit any additional documentation that you believe would be helpful in supporting your claims. This feedback will assist in future credit revisions.
All Projects
Complete the Google Form as submittal for this credit.
AND
Upload. A copy of the contract(s) in place for all services necessary to execute the M&V program.
Upload. Provide written documentation of the M&V program consistent with Option D: Calibrated Simulation in IPMVP Volume III, 2006.
Upload. A copy of the final report describing the M&V program and outcomes.