Hi All, 

We get a lot of concrete mixes that have reduced carbon footprint, however we're not able to use that for LEED because they dont have EPDs. I was wondering if LEED with accept the...

I have courthouse project that involves two existing buildings being connected with a newly constructed third building.  Since one of the existing buildings connected to the third one is...

I have read through a lot of threads in this forum and am still not understanding how I can look at an EPD and confirm if it contributes to option 2. Other than specifcially using materials...

I am working on a homeless shelter project with three large water uses: kitchen, laundry, bathrooms (toilets, sinks & showers) where toilets are on cistern water. I am wondering if the...

How should I calculate the Fan CFm and power for Baseline LEED Model, Autosize the baseline system , then use Q=mCpDeltaT to calculate fan CFM and then find out the HP and use pressur adjustment...

Our project is registered under the LEED v4, but we have substituted the EAc5 and EAc7 with the EA credit Renewable Energy from LEED v4.1, we intend to use the Tier 2 and purchase...

Since this is listed as an alternative compliance path for LEED v4 ID&C Thermal Comfort; if we meet the requirements for both IEQ credit Thermal Comfort and the requirements for the pilot...

We are working on a small commercial office space whose staff have flexible work arrangements. In this new office space, the staff is commited to composting and championed a composting program...

We're working on a 35,000 SF lab building on a campus district cooling loop. The baseline system type is #5, so there's no chilled water in the baseline. The project overcoming the process heat...

Hi Everyone,

For a project connected with DCP, is it sufficient to meter the chilled water coming into the project using a single BTU meter for the 'Space Cooling' end use? What if the...