Post a question or comment
Filter by location
Forum
Topic
Replies
Recent

MRc2

General forums
posted by  Pamela Lippe  on 

When I went in to make my comments the other day, I got kicked out before I could finish and since it is impossible to go back and edit on the USGBC website, I will complete my comments here. Plea

0

MRc3

General forums
posted by  Pamela Lippe  on 

Under Option 1, It is not clear where the information that is being requested exists.

0

MRc4

General forums
posted by  Pamela Lippe  on 

Why not use the word disclosure again or transparency rather than reporting in the title?

0

Treated water for landscaping

EBOM-2009 WEc3:Water Efficient Landscaping
posted by  Manasi Kulkarni  on 

Our project has installed water meters for Irrigation just recently at the start of performance period. The project uses 100% of treated water for Irrigation which is metered.

1
Mon Apr 1, 2013, 6:43 pm

why the distance between the

NC-2009 SSc1:Site Selection
posted by  sujata shakya  on 

why the distance between the previously undeveloped land and a water body is taken 50 feet???? can u more elaborate the reason why the distance is being taken 50 feet......

1
Mon Apr 1, 2013, 1:50 pm

Infrequent Transient Loads

NC-2009 PIf3:Occupant and Usage Data
posted by  Allison Zuchman  on 

I am working on a high school project. I have a few questions on how to list transient occupant load for spaces with high occupancy but that are used infrequently.

1
Wed Apr 24, 2013, 6:08 pm

SRI of White Stone Ballast

NC-2009 SSc7.2:Heat Island Effect—Roof
posted by  Tate Walker  on 

I am working on a project that has roughly 50% of the roof surface covered in white colored (not white coated) stone ballast and 50% white PVC.

1
Tue Apr 2, 2013, 2:16 pm

VRP calculation using design occupancy value

CI-2009 IEQp1:Minimum IAQ Performance
posted by  Cassini Kit  on 

I have a question about the occupancy value of VRP calculation.

1
Tue Apr 2, 2013, 4:08 pm

Urinal pre-wash and fuzzy control

NC-2009 WEp1:Water Use Reduction—20% Reduction
posted by  Noriko Nagazumi  on 

Hi all, How would you set the water use for urinals that: 1. Have a 2 liter pre-wash that may be used or turned off 2.

0

typical floor v/s whole building simulation

CS-2009 EAp2:Minimum Energy Performance
posted by  shashank jain  on 

Hi we are doing the eap2 modelling for a 18 floor office building. the floors are all the same. we need to submit the modelling results for precertification.

1
Tue Apr 2, 2013, 1:12 pm