Does anyone have any tips for getting the building occupants excited about participating in the ergonomic credit and learning about their new ergonomic features in their building?

When reusing an existing building (major renovation) then only any new wood materials would be applicable for the credit?

Dear all, We're working on a project that renovates a tiny portion (interior fit out only) of an existing building and involves an addition right next to the renovated portion.

We have a NC-2009 project were there is an automotive service area that has a washfountain for use by the mechanics only.

Our current project is located on a plot of land that 3/4 of it was developed into commercial retail.

Hi, We have a project with some areas served by AHUs and some areas served by contant volume FCUs.

In the Reference Guide on page 254 in Table 1.

If a LEED for Schools project earns EQc4.1, 4.2,4.3, and 4.4; can they then use IDc 4.5 as an ID credit?

Minimum Energy Performance Calculator on process loads tab under receptacle equipment modeling methods paragraph indicates there are three options to model receptacle equipment: average equipment p

Hi Marcus, Please advise me regarding ASHRAE 90.2007 mandatory provision item 9.4.4 which is written as follows: "All exterior building grounds luminaires that operate at greater than 100 W shall