We have had problems with wood veneers that blacken/discolor when installed over fire-treated NAUF substrate, especially with light-colored wood.

I am using sketchup and Daysim for daylight simulation for a school project. My results give me daylight levels for every hour, every day of the year.

On the table for Environmentally Preferable Products (Table 1 in the reference guide for MR2), under Roof AND floor AND wall for the insulation component, which version of the California "Practice

If pre-1993 plumbing fixtures are still in place (i.e.

Is it the system or the zone that must comply with the ventilation requirements?

I found the following reference guide addendum about the daylight measurement path: In the requirement it says: "Measurements must be taken on a 10 foot grid.." and in the calculations section it s

The EA 1.4 is self populated by EAp2.

My manufacturing facilty has more than one kind of process type water user, and they are very distinct.

We have a project that uses a waterstop in an elevator pit. The waterproofing is on the exterior side of the concrete.

I am currently working on a project in southern Colorado (very dry) that is doing a phased flush-out but there is currently no way to monitor interior humidity.