Forum quick links
Form requires photos of moisture control
CI-2009 IEQc3.1:Construction IAQ Management Plan—During Constructionposted by Raphael Sperry on
Has anyone else noticed that the form requires "Upload photos documenting moisture protection methods. Photos should include date and time stamp.
Hi,
We are using asphalt as
NC-2009 IEQc4.2:Low-Emitting Materials—Paints and Coatings
posted by MAUDE PINTAL on
Hi, We are using asphalt as a coating on a concrete floor for interior parking.
Restaurants requirements of recyclabes
CS-2009 MRp1:Storage and Collection of Recyclablesposted by BH . on
Does LEED require some extra recyclng/collector space for office building projects with restaurants, as it is i.e. in BREEAM ? Thanks.
Combining option 1 and 2
CS-2009 SSc7.1:Heat Island Effect—Nonroofposted by Mathilda Jonsson on
Hi Of all 60 parking spaces only one is located above ground. We really want to put open-grid paving as material for this parking space that is not under ground.
Case 1 Option 2
CI-2009 EAc3:Measurement and Verificationposted by breeze glazer on
We have a situation where the tenant space, is within a building owned, by the owner.
FTE Calculation for Movie Theatres
posted by Nilo Regojo on
We are calculating FTE for a 2,500 seat, 14 screen movie theater. There will be 20 Full Time Employees but the number of patrons (Peak Transients) will vary greatly.
Hi,
Does anyone know if the
NC-2009 SSc4.3:Alternative Transportation—Low-Emitting and Fuel-Efficient Vehiclesposted by Diego Prada on
Hi, Does anyone know if the car parking lifts can be used for preferred parking?? Thanks
Project Site Area vs. LEED Boundary Area
Schools-2009 SSc5.2:Site Development—Maximize Open Spaceposted by Breana Detzler on
We are currently doing a project registered under LEED for Schools 2007 and have a LEED Project Boundary that does not include the existing bus maintenance facility or a portion of the existing pa
Preferred file format for plan uploads - PIF4
posted by Lew Bonadies on
When uploading floor plans, site plans, elevations etc. are pdf files the accepted format, or can we use the new Autodesk Design Review dwf file format?
Missing LEED information for some items
CI-2009 MRc4:Recycled Contentposted by Sandra Eremic on
There are a few items in my project for which LEED information is not available - like desk lamps, desk pads, hangers, coasters, even some fabrics. Can I still submitt for the credits?