Forum quick links
Outdoor Airflow Measurement Device in AHUs
Schools-2009 IEQc1:Outdoor Air Delivery Monitoringposted by Thomas Kohmann on
There are a few AHUs in the project for which I work. One AHU supplies less than 20% of the non-densely-occupied rooms with its air volume flow, but still has outdoor airflow measurement devices.
BD+C Major Renovation or O+M Existing Buildings
posted by Catherine Verdier on
Hello, The project I am working on is an existing office building, that will undergo renovation works and will have its entrance hall extended (the extension will be a little more than 1,000 sf).
Non occupied spaces
NC-v4 EQc2:Low emitting materialsposted by Caroline PIN on
Hello, Is nonoccupied spaces are affected by this credit ?
Green walls
NC-v4 WEc1:Outdoor water use reductionposted by Julien Richard on
Hi, Do we have to include green walls in the calculation ?
Global Compliance Paths EN 15251
NC-2009 IEQp1:Minimum IAQ Performanceposted by Elodie DUMAS on
Hi, There's several quality level for interior air in EN 15251 : category I to III.
LTc4- Long-term bicycle storage, Bicycle maintenance program
Retail-CI-v4 LTc4:Bicycle facilitiesposted by Valentin Grimaud on
Hi, I am working on a store located on the groung floor of a mall.
n/a
NC-v4 EQc5:Thermal comfortposted by Anaïs P on
Hello, I am working on trying to obtain the indoor environmental quality-thermal comfort credit for a new construction. The building contains new open-office workstations.
Tenant Area Modeling
CS-v4 EAp2:Minimum energy performanceposted by Aaron Luthien on
Hello all, We have a C&S office project where the owner prepares technical infrastructure for VRF heating cooling system in tenant area.
Operable windows in lieu of controls - what about WOCDs
CS-2009 IEQc6:Controllability of Systems—Thermal Comfortposted by Andreas Hintz on
For determing the openable wall area (which has to be a minimum of 4% of the net occupiable floor area) should WOCDs (Window Opening Control Devices) be considered?
EAp2:Table 1.4 based on ASHRAE 90.1-2010
CS-v4 EAp2:Minimum energy performanceposted by CHRISTOPHE MATHIEU on
Hi all, I have a project CS LEED v4 and I couldn't found a table 1.4 with the new 90.1-2010 Standard on the LEED website. I have read that I can present the table 1.4 based on 90.1-2007 standard