Is expected to the next version of LEED, specially LEED EB O&M, any issue about Energy Quality (ex:, sag, swell, harmonics etc) ?

In our jurisdiction, encapsulation of contaminated soils (with a "cap" that contains and prevents leaching) is considered acceptable for remediating a site.

I am trying to complete PI FORM 3: OCCUPANT AND USAGE DATA. However, I cannot seem to find the location to enter the male to female ratio.

i m using HAP 4.41 for HVAC load calculation and energy modeling but unfortunatly the weather data available is hourly average s it ok to use for leed energy simulation or i ahve to go to another f

I am not too clear on the definition of Gross Floor Area and how is the calculation carried out with respect to the CI requirement of alteration to at least 60% of the gross floor area. I thought

In our builing, some regulary occupied spaces are located in B1~B2. To earn this credit 8.2, we decided to make sunken beside B1~B2 wall.

Can a flooring system be tested using the latest version of CDPH test method and still comply to NC 2009? NC 2009, option 2, demands that all flooring products meet the testing requirements of Cal

We are working on a project using the May 2011 version of the daylighting and views spreadsheet. We are using excel 2007 with macros enabled.

My project site is already utilizing reclaimed water for 100% of it's irrigation, as required by the local city ordinance. Are we still eligible for this credit?

LEED-CS 2009 form WEp1 version 4.0 states the following: "Note: The flow rate for all pre-rinse spray valves must be less than or equal to 1.6 gpm.