I think I posted this question on the wrong page beforehand, so I'll post it again here. We are trying to account for a CHP plant near our project in our energy model.

I am working on a building that is a part of a 6 building renovation made up of several different teams.

We are trying to classify a winery. One of the areas is used for barrel fermentation, and is temperature controlled anywhere from 55-75 degrees based on the fermentation process.

In filling out the Space Usage Type table on PI f3 I've noticed the form doesn't seem to 'like' when your regulalry occupied area is equal to your unconditioned area.

Hi, in the table 6.8.1J of ASHRAE 90.1 there is a "condenser Flow rate" parameter, expressed in gpm/ton. My question is: to calculate this parameter do I have to use the nominal refrigeration powe

Has anyone had experience with meeting the IAQ testing requirements using the Directsense IAQ Plus Screening tool from Graywolf Sensing Solutions.

In regards to products that are included in this calculation, would a projector be included?

HI, IM RICARDO GUEMEZ FROM MEXICO CITY, I AM IN THE PROCESS OF SIMULATING A WAREHOUSE FOR TENANT LEASING, THE OWNER IN ALL PROJECTS ONLY INCLUDE NATUARAL VENTILATION WITH IEQ-01 COMPLIANCE.

We have been attempting to achieve this credit with tree canopy coverage in our parking lot.

Hi All, So I know that the MicroClimate Factor (Kmc) must be the same for the Baseline and the Design, but what if the Landscape types in the Baseline and the Design are not the same at all. .