Forum quick links
Code required site lighting
posted by Bill Swanson on
In this draft SSc8 has removed the exemption... "lighting that is specifically designated as required by a health or life safety statute, ordinance, or regulation." I understand this was a loop ho
Disinfectants
EBOM-2009 IEQc3.3:Green Cleaning—Purchase of Sustainable Cleaning Products and Materialsposted by Thomas McDermott on
Our cleaning company is proposing to use a "Enviro Solutions - Neutral Disinfectant Concentrate #256". First, I'm not even sure which standard/certification (i.e. GS-37) I should be looking for.
baseline HVAC system for Energy modelling
NC-2009 EAc1:Optimize Energy Performanceposted by Grace Ming on
Hello All, We are now preparing the Energy modelling for one of our projects located outside USA. It is a 2 storey non-residential building with VRV system for cooling only.
is Reach compliance equivalent to floor score?
CI-2009 IEQc4.3:Low-Emitting Materials—Flooring Systemsposted by Nandana Kumar on
Our client has proposed tarkett flooring products that meet REACH complaince standards. Can this be considered equivalent to floorscore?
On-property smoking
CS-2009 IEQp2:Environmental Tobacco Smoke (ETS) Controlposted by Angela Saggin on
Hi! I'm working on a project of a multifamiliar building and we've chose Option 2, Case 2. It's prohibit to smoke in all common areas, except on a specific area more than 25 ft from entries and o
Janitor / Mop Sink faucets
NC-2009 WEp1:Water Use Reduction—20% Reductionposted by Abena Darden on
Hi all, I was surprised to receive a recent review comment for WEp1 noting that we had left out the janitor sink faucet in our calcs.
No "equivalency" stated for ASHRAE 90.1-2010 and Title 24-2008?
posted by Drew George on
It is my understanding that the proposed version of LEED 2012 does not include an "equivalency" between ASHRAE 90.1-2010 and California's Title 24-2008 energy code.
Heat Recovery wheel
NC-2009 EAp2:Minimum Energy Performanceposted by Tarek Dalati on
I am Using equest to do the energy model.but it seems it can t model a energy recovery ventilator to serve several systems. So my question is can I model each system with small ERV using the same e