Forum discussion
NC-v4 EQc2: Low emitting materials
Hello, I am working on a project that would like to use a product that has been tested to Section 01350. This is required for CHPS low-emitting compliance and is listed as an alternative on the third-party certification and labels as eligible. However, the TVOC range is not provided. Can you please confirm if it is an acceptable alternative to CDPH Standard Method v1.1?
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
Are throw rugs subject to the credit requirements?
What are the adhesives and sealants to be included in the documentation?
Is there a VOC budget method for this credit?
What are the limits on the VOC budget method?
Do products applied to the weather barrier need to comply with VOC thresholds?
If one part of my multicomponent wall system is not compliant, can I still get full credit?
PAWAN DAHIWAL
10 thumbs up
September 16, 2018 - 11:50 pm
TVOC range needs to be provided on the test certificate. Usually, If it is in compliance with CDPH Section 01350, TVOC range is provided on the test certificate.
If you look at any CRI GLP certificate, you will find that they are mentioning CDPH 01350 v1.1 or v1.2 compliance. So it would not be wrong assuming that if material is gone through CDPH 01350 testing, they have gone though all the corresponding sections.