See all forum discussions about EBOM-2009 EAp2
 Subscribe to new posts about EBOM-2009 EAp2 Post a new question aboutEBOM-2009 EAp2
See LEEDuser’s guidance on EBOM-2009 EAp2»
FAQs about EAp2 :

I have a mixed-use building and am wondering if it is possible to pursue the prerequisite through Case 1. How do we proceed?

We have a building that consists of two attached structures and it’s unclear if we have to consider it a single building or if it should be certified as two separate buildings and benchmarked accordingly. How should we proceed?

How long is an Energy Star label valid to use with a streamlined approach for Case 1?

Our building includes heavy process loads that significantly increase the overall energy use in the building. If we submeter these loads, can we exclude this energy use for benchmarking purposes?

We have installed submeters on our building but the utility bill includes energy use from several other buildings located on the same campus. How do we reconcile this during the LEED review process?

When is it possible to exclude up to 10% of the building from EAp2?

What do I do if the number of building occupants, operating hours, or vacant space changes during the performance period?

If you pursue the streamlined path for an Energy Star label, should the performance period for EAc6 match the 12-month time frame of the label?

How do I account for computers with multiple monitors on Portfolio Manager?

How should I treat vacant space on Portfolio Manager?

Our building includes a large laboratory space. Can our project benchmark under the Labs21 program?

We have an international project and the space type is eligible for an Energy Star rating. Can we pursue Case 1 to demonstrate compliance given the recently released alternative compliance paths for international projects?

We have a number of buildings on a single campus that we would like to certify at the same time. Is it possible to benchmark the buildings at the campus level?

View answers »

Forum discussion

EBOM-2009 EAp2:Minimum Energy Efficiency Performance

Solar street light

Hi, In our project 36 No of 25 Watts individual solar street light is available. We could not meter the energy consumption of each individual solar light because there is no common panel for all the lights. Kindly advice me how to document for energy star portfolio manager.

0
Post a reply

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Profile picture for user mwopitz
Michael Opitz
Director of Sustainability
Iconergy
LEEDuser Basic Member
40 thumbs up

Tue, 11/24/2015 - 22:22

Satheesh, It depends on your situation. Here is a quote from ENERGY STAR's online help related to metering solar energy production: "However, if your solar panels generate a nominal amount of electricity (i.e. less than 1 % of your total energy), you can exclude them from your property." In other words, if your 36 solar street lights, taken together, produce less than 1% of your property's total energy in a year, you don't need to do anything. Simply document this fact for the LEED reviewer. If they are more than 1%, you must meter some of them until the unmetered total becomes less than 1%. Mike O.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.