Greetings,
When modeling Proposed model for LEED and there are shadings from adjacent buildings in it, should these shading be applied also to the Baseline model or they should be omitted like the other external devices such as overhangs, vertical fins, etc.
Thanks
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5907 thumbs up
August 22, 2014 - 10:18 am
They are applied identically to both models. See Table G3.1-14(a).
Vassil Vassilev
ManagerTermoservice
13 thumbs up
August 23, 2014 - 6:55 am
Thanks for the reply Markus,
Actually my question is for a project registered for LEED CS v2009 and following ASHRAE 2007.
Sorry of placing this question upon LEEDv4 section. While reading the discussions, I forgot to change rating system to which my question referred.
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5907 thumbs up
August 25, 2014 - 9:57 am
Under 2007 you are not required to model adjacent buildings. In some cases for the accuracy of the model it is a very good idea to model adjacent buildings. If you do so they must be modeled identically in both.