Forum discussion

NC-2009 WEp1:Water Use Reduction—20% Reduction

Residential Dual Flush Fixture Usage

We are evaluating dual flush fixtures for our residential project. I see in the Water Use Reduction guidance the weighted average methodology. And they comment on the 1:2 ratio of full to low flushes. This is the commercial usage pattern and is predicated on one "BM" per day. However, residential usage is 5 flushes per day (rather than 3). Are we to assume for the weighted average calculation that it is still a 1:2 ratio? That in fact for residential use there are 2.5 "BM's per day? Or do we stay with one full flush and 4 low flush uses?

3

You rely on LEEDuser. Can we rely on you?

LEEDuser is supported by our premium members, not by advertisers.

Go premium for $15.95  »

Thu, 01/05/2012 - 23:20

I never encountered this situation but I would try conservative approach. Hopefully this will achieve the reduction percentage you are looking for.

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.