Does anyone else notice a potential bug with the private lav faucet rows in the WEP2? The calculator allows users to enter input details for the fixture type, but colums U&V don't populate with selection. Anyone else notice this and/or have any workarounds to share?
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Afogreen Build
www.afogreenbuild.comGreen Building Consultant
214 thumbs up
December 1, 2020 - 7:21 pm
Hi RDK E&S,
Have you filled up the number of occupant under residential (cell H11 (or cell H12 and H13 if you tick non default gender mix) in LEED Indoor Water Use Reduction Calculator)?
The private lavatory faucet is for residential in fixture type, therefore you must fill up the number of occupant under residential.
Once you filled up that number, the uses per day under residential (column O) and total daily use (column R) will be generated immediately. Then the total daily water use for baseline and design (column U and V) is also generated directly.
Thank you