Hi everyone
What is the most recommended energy simulation software you have used for the EAp2 requirement? My first options are Design Builder and Green building studio so I hope you can help me with the name of other ones
Regards
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5868 thumbs up
July 16, 2023 - 4:13 pm
Not sure about the most recommended but the most commonly used software for LEED submissions include eQUEST, Trane TRACE, Carrier HAP, and IES-VE, in addition to those you name.
Afogreen Build
www.afogreenbuild.comGreen Building Consultant
219 thumbs up
March 13, 2024 - 4:38 am
Hi Antonio,
There is no specific preferrable energy modelling software to use from LEED.
It definitely depends on your project scope, complexity, and objectives for sure, as long as the software complies with and approved by LEED, then it should be fine to use. Here are the options for software that can be used for LEED Energy Modelling: EnergyPlus, EnergyPro, eQuest, HAP, IES, Trace.
Best regards - Afogreen Build Team
Marcus Sheffer
LEED Fellow7group / Energy Opportunities
LEEDuser Expert
5868 thumbs up
March 26, 2024 - 7:48 pm
To be clear LEED does not approve software. The software must meet the ASHRAE 90.1 appendix G requirements.