Forum discussion
NC-2009 SSc7.2: Heat Island Effect—Roof
We are designing a low rise residence and the local building official believes we need guard rails an edges > 30'' above grade. We are providing anchor points for maintenance staff. Roof slope is nearly flat.
Has anyone had a similar experience and how did you handle it????
LEEDuser is supported by our premium members, not by advertisers.
Go premium forTo post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.
We don't know the SRI value of some roofing materials we are using. What should we do?
Do balconies and terraces need to be counted towards the roof square footage?
How does one calculate the square footage of a pitched roof?
Susan Walter
HDRLEEDuser Expert
1299 thumbs up
January 11, 2011 - 4:01 pm
This came up recently and we looked at a recently posted OSHA ruling. Thought it would help others.
Safety and Health Regulations for Construction
Fall Protection
1926.501(b)(1)
"Unprotected sides and edges." Each employee on a walking/working surface (horizontal and vertical surface) with an unprotected side or edge which is 6 feet (1.8 m) or more above a lower level shall be protected from falling by the use of guardrail systems, safety net systems, or personal fall arrest systems.