See all forum discussions about EBOM-2009 EAp2

Subscribe to new posts about EBOM-2009 EAp2 Post a new question aboutEBOM-2009 EAp2

See LEEDuser’s guidance on EBOM-2009 EAp2»

FAQs about EAp2 :

How do I account for computers with multiple monitors on Portfolio Manager?

How should I treat vacant space on Portfolio Manager?

Our building includes a large laboratory space. Can our project benchmark under the Labs21 program?

We have an international project and the space type is eligible for an Energy Star rating. Can we pursue Case 1 to demonstrate compliance given the recently released alternative compliance paths for international projects?

We have a number of buildings on a single campus that we would like to certify at the same time. Is it possible to benchmark the buildings at the campus level?

I have a mixed-use building and am wondering if it is possible to pursue the prerequisite through Case 1. How do we proceed?

We have a building that consists of two attached structures and it’s unclear if we have to consider it a single building or if it should be certified as two separate buildings and benchmarked accordingly. How should we proceed?

How long is an Energy Star label valid to use with a streamlined approach for Case 1?

Our building includes heavy process loads that significantly increase the overall energy use in the building. If we submeter these loads, can we exclude this energy use for benchmarking purposes?

We have installed submeters on our building but the utility bill includes energy use from several other buildings located on the same campus. How do we reconcile this during the LEED review process?

When is it possible to exclude up to 10% of the building from EAp2?

What do I do if the number of building occupants, operating hours, or vacant space changes during the performance period?

If you pursue the streamlined path for an Energy Star label, should the performance period for EAc6 match the 12-month time frame of the label?

View answers »

Forum discussion

EBOM-2009 EAp2:Minimum Energy Efficiency Performance

EAP2 case 1 for international projects

Elodie DUMAS

ALTO Ingénierie

LEEDuser Basic Member

15 thumbs up

Project location :

April 28, 2015

I have a question about the following statement from above : "We have an international project and the space type is eligible for an Energy Star rating. Can we pursue Case 1 to demonstrate compliance given the recently released alternative compliance paths for international projects? Yes, international projects that are comprised of ratable space under Energy Star must still pursue the EAp2/EAc1 via Case 1." Does it mean that it is possible to obtain an energy performance rating from Energy star for any project/location outside US as long as the building type is ratable ? If someone has a feedback about this specif case I will be glad to get some details . Thanks in advance

Post a reply

Eric Johnson

Sustainable Cost Solutions LLC

LEEDuser Premium Member

195 thumbs up

Tue, 04/28/2015 - 18:59

http://portfoliomanager.supportportal.com/ics/support/KBAnswer.asp?questionID=14535&hitOffset=316+238+72+10&docID=2863 http://portfoliomanager.supportportal.com/link/portal/23002/23010/Article/14411/Are-properties-located-outside-the-U-S-eligible-for-ENERGY-STAR-certification-or-a-score

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.