I'm familiar with seam sealers that can comply with IEQ c4.1 but I have a submittal for a "seam cleaner" where the VOC content is far beyond anything SCAQMD references. Is this considered an adhesive or does it go beyond the requirements for IEQc 4.1?
Thanks.
You rely on LEEDuser. Can we rely on you?
LEEDuser is supported by our premium members, not by advertisers.
Go premium for
Susan Walter
HDRLEEDuser Expert
1296 thumbs up
April 25, 2012 - 1:28 pm
Bruce,
I was researching out the rules on how cleaning agents become incorporated in LEED and came up with nothing (outside of EBOM green cleaning credits). It does not appear to be directly covered under any of the NC credits. HC references NC credit language for Source Control. The cleaner in my case was very high VOC and I asked for it to be removed from the job site citing the project's IAQ plan and its intent. We'll be tightening up our IAQ section in response.
Susan
Abena Darden
Senior AssociateThornton Tomasetti
273 thumbs up
April 25, 2012 - 2:42 pm
Hi Bruce-I am facing the same issue on one of our projects. It is an oil-based cleaner for a bowling alley that appears to be part of regular maintenance. Because Green Cleaning is used as an ID point on most of our projects, I was tempted to slot it in there and ask for a substitution. My next step is to call it a "coating" and see if it turns up on the full SCAQMD 1113 database. Did you do that already, Bruce? Either way, because the VOCs are so high I'm wondering about the necessity of using it. I agree with Susan--kicking it back to the sub would be a good idea. It may be a warranty issue in my case, but in yours, I would ask for more info in your submittal review to see if it's really necessary.