Next to our project there is a city network of bicycle paths (marked lanes on a pavement) leading to many diverse uses and rapid transit stops. The Investor is also planning to provide appropriate bicycle racks and shower facilities. The only problem is that the city bicycle network is 2m wide while the requirement of this credit is a bicycle path at least 2.5m wide. It is not possible to make the paths wider because they were made by the city authorities. Would a Europe Alternative Compliance Path apply here even though the project is not located in a historic district? Would an explanation confiming that the bicycle paths are safe because they are not used by cars be accepted?

Post a reply

Sara BENLOUBA

Green building manager

Confidential

LEEDuser Basic Member

13 thumbs up

Fri, 01/17/2020 - 13:34

Hello Agata, Where does this 2.5 m requirement exist in the LEED guide? Did you get answers to your question? I am also looking for an answer for my project. I'il appreciate your return, Thanks,

Agnieszka Rylska

GO4IT SP Z OO SP K

LEEDuser Basic Member

26 thumbs up

Fri, 01/17/2020 - 13:53

Hi Sara, Bicycle network width is defined on page 110 in the Definitions section of LEED Reference Guide. I didn't get any clear answer to my question yet.

Christoph Keck

CES Clean Energy Solutions GmbH

LEEDuser Basic Member

7 thumbs up

Tue, 08/08/2023 - 09:03

Hi, did you ever get a response? We have literally the same situation as described in the initial post. Would be very helpful if anyone could comment if an exception can be made for European projects when the bike lane width doesn't meet the 2,5m requirement. Thanks. BR Chris

Afogreen Build

www.afogreenbuild.com

Green Building Consultant

LEEDuser Premium Member

249 thumbs up

Mon, 04/15/2024 - 03:52

Hi Christoph,

Please kindly refer to LEED CSv4 credit library for bicycle facilities in Europe ACP Bike Path Width section below:
https://www.usgbc.org/credits/new-construction-core-and-shell-hospitality-new-construction-data-centers-new-construction-0?return=/credits/Core%20and%20Shell/v4
Based on this section, this exception is specific for the project that cannot meet bike path width requirement due to the historic urban context of the project site. In addition, there is no written information visible in the addenda or other guide references that facilitate this.
So, if the Europe project is not in historic urban location, then it must meet width credit's requirement as requested on LEED.
Best regards – Afogreen Build Team

Add new comment

To post a comment, you need to register for a LEEDuser Basic membership (free) or login to your existing profile.

You are currently logged in under an enterprise account

FAQs about LTc6 :

Bicycle path width

You rely on LEEDuser. Can we rely on you?

Add new comment