Forum

Hello,

This credit requires us to comply with the U-values prescribed by ASHRAE Standard 90.1-2007.

Our project has a Glass skylight covering more than 5% of the roof. The U-...

Are there some list of sooftware which can be used for modeling? Can we use eQuest programm for it?

For a core & shell project in which the developer does not have control over interior (tenant) build-out, why does the LEED Online form require (or is automatically populated with) EPA Target...

Hello,

Does anybody know how to integrate dimming lighting power in the total installed interior lighting power ? Do we assume that the light bulbs are always dimmed to the max (and...

For Core and shell rating system, do I consider the Process energy in the calculation.

below equation is what i have in mind after read the guidebook.
[(Process + non-Process...

Hello,

I am going to certify a shopping center and I have two questions:

1) Its façade uses recessed volumes to create movement and interesting angles, interposing façade panels at...

Hi there,

I am in the process of filling out the LEED EAp2 form for a LEED-NC project. On page 7, table EAp2-4, when I input the numbers from my Energy model (EnergyPro, UTIL-1) into the...

Should a computer be calculated as 400W or according to Energy star in our case 175 KWh/annual or around 80 W?: ref: http...

Should future restaurant equipment be enluded in the calcs?

What is the corret way of calculating lighting and equipment controlled by Building Management System?