Forum

Gordon Shymko Principal G. F. Shymko & Associates Inc. LEEDuser Basic Member 138 thumbs up June 16, 2010- 6:52 pm As I describe in the 2009 CI EAc3 M&V thread on this forum (see response to Julian Bott's inquiry), the CI EAc3 language has a number of problems. To reiterate: Rather than reusing/rehashing the NC 2.0/2.1 language Case 2 should have adapted the 2009 BD&C EAc5 language (also used for NC 2.2). It cites IPMVP Vol. III with specific guidance for the available options (Option C makes little sense for CI) and dispenses with the arguably flawed "old" list...

What is a typical "centrally monitored" system? I have a core and...

Hello,

One of the requirements of EA Credit 5.2 is to "provide a process for corrective action if the results of the M&V plan indicate that energy savings are not being achieved"....

I am working on a LEED-CS 2009 project. We will reach Credit EA 5.2 Measurement and Verification – Tenant...

Dear all,

We're developing an M&V Plan for a large commercial mall. Every tenant will be equipped with an electricity submeter, connected to the Mall's BMS.

The tenants will be...

The developer's CS project consists of two large leasable spaces. One wing to be used for a department store, the other one to be used as furnished apartments. There are basically only two...

Hello,

At the right of the screen says that 0 of 210 certified projects in C&S earned this credit. I'd like to know why? As far as I know, this credit requires to submit a plan that...

We have a project that will not provide submetters for future tenants however the BMS system will be ready for future tenants to provide their own submetter in order to measure electricity...

Hi all,

In our project, there will be a tenant lease agreement so that the Lighting Power...

Please help with this scenario:

Core and Shell project with 8 tenants (light manufacturing).
Goal of achieving EAc5.1 and EAc5.2.

The developer will meter total energy use of...