Forum

From the USGBC website:
"LEED 2009 for New Construction, LEED 2009 for Core & Shell, or LEED 2009 for Schools projects that participate in BPP Data Collection Phase 1 and signing a...

For the MPRs for a Core & Shell project, the five year data reporting period begins when occupancy achieves 50% of its "Typical Physical Occupancy". Is the start point the same for M&V...

Tristan Roberts Representative Vermont House of Representatives LEEDuser Expert 11477 thumbs up August 16, 2010- 12:36 pm We were just discussing this very question under the LEED-EBOM EAc1 forum. I will refer you to that conversation. Log in or register to post comments ...

I am currently working on an M&V plan for the...

Dear all,

I am attempting LEED 2009 CS, EA Cr 5.1 & Cr 5.2.

My project is 4 multi-storey commercial buildings, whereby a different tenant occupies each floor of a building....

I understand that occupancy calculations are to be consistent between all credits. For PIf3 Space Usage calculations, we used the default occupancies given by LEED in Appendix 2009. We...

Hi, I don't understand why the reference guide is asking to calibrate the as-built simulation model to the actual energy use. In a new construction there is no actual energy use yet, unless you...

When we enter the calculated consumptions from EA P2 into the EA C5.1 LEED Online form, can I than use other values, which are based on actual building operation and performance?
We deal...

Hello, I have read thru the previous posts and responses, and hope this is not a redundant question. I am working on a C&S major renovation. We are going to follow Option B from...

The LEED reference guide is very particular in the language that they use to describe the intent and stragegies for EAc5.1 and 5.2 for C&S as being distinct from NC & Schools.

For...