Hi all,

I am modeling a cooling tower the fan meets the requirement of Appendix G, but I am not sure what is the fan power should be used for the baseline, Should I use the same as...

simulation level for a having a positive feature (increased ventilation).   I found different replies on modeling related forums regarding this topic, probably because as you said, it changed from 2007...

Dear All,

We have a projects designed for commercial purpose with 3 main spaces types:
- Restaurant: ~34,000 s.ft., 10 stories
- Offices: ~40,000 s.ft., 9 stories
- ...

I am modelling a hotel project. After assigning the residential zones (bedrooms + access corridors) to System 1 – PTAC, there is approx. 6,700 ft2 of conditioned floor area remaining which...

Dear All

Our project uses a...

Dear All:-

We have large manufacturing facility with Humidification plant & Chiller

The Electrical load of this Humidification plant is about 3000 kW (supply, return fan, Water...

I have an addition to a manufacturing plant. The addition has its own HVAC system so the LEED boundary encompasses just the addition. The addition is 56,000 SF and the whole plant is somewhere...

Hello, 

The HVAC system I'm modelling has two heat-pumps with a water side energy recovery device, so that it is possible to heat and cool (or dehumidify) the spaces simultaneously and...

The exceptional calculations used to be entered into the LEED template but with the streamlined templates, the tables are no longer included in the form. Where do we document exceptional...

I have been brought into this project as the LEED consultant at a very late stage (about to start construction).  

This is the third phase of a large college science facility.  This is an...