Log in
Forum » Poland
Topic

Locker rooms

CI-2009 IEQc1: Outdoor Air Delivery Monitoring
posted by Agnieszka Rylska on Apr 19, 2017, 6:45 am

Are CO2 sensors required in locker rooms? Loker rooms are non-regularly occupied spaces but they are also densely-occupied...

Last reply: Tristan Roberts, Aug 26, 2017, 6:50 pm

site fence

NC-2009 SSp1: Construction Activity Pollution Prevention
posted by Agnieszka Rylska on Jul 11, 2016, 7:47 am

Are there requirements regarding specific fence type around the site? Is it allowable to have a fully-closed (wind-tight) fense only on a part of a site boundary and an openwork fence on the...

Last reply: Tristan Roberts, Aug 26, 2017, 5:50 pm

shared waste area

EBOM-2009 MRc7: Solid waste management - ongoing consumables
posted by Agnieszka Rylska on Nov 3, 2016, 9:16 am

I am working on two projects which will be certified separately. They are located next to each other and they share waste area and waste bins. Is it acceptable to divide the total waste volume...

Last reply: Trista Brown, Jul 6, 2017, 2:33 pm

Locker rooms

NC-2009 IEQc1: Outdoor Air Delivery Monitoring
posted by Agnieszka Rylska on May 8, 2017, 8:57 am

Are CO2 sensors required in locker rooms? Loker rooms are non-regularly occupied spaces but they are also densely-occupied...

Last reply: Andrew Mitchell, P.E., May 8, 2017, 9:12 am

IAQ calculator v03

EBOM-2009 IEQp1: Minimum indoor air quality performance
posted by Izabela Kwiecinska on Apr 27, 2017, 9:07 am

The new calculator (v2009v4_Minimum...

Last reply: Izabela Kwiecinska, May 8, 2017, 3:43 am

Notes under table in LEED credit form

NC-2009 EAc4: Enhanced Refrigerant Management
posted by Patryk Marciniszyn on Mar 14, 2017, 10:34 am

Hi all,

under the table in LEED credit form there is a note:

Average refrigerant impact per kW must be less than or equal to 13 for 2 points.

Does it mean that I won't get 2...

Last reply: Anna Bak, Apr 28, 2017, 5:02 am

Electronic equipment

CI-2009 MRc2: Construction Waste Management
posted by Agnieszka Rylska on Apr 5, 2017, 5:01 am

Should electronic equipment be included in the waste calculations (should we monitor it's weight) or should it be only mentioned in the Construction waste management plan that it's exluded from...

Last reply: RETIRED, Apr 5, 2017, 11:21 am

Special purpose faucets

Schools-2009 WEc4: Process water use reduction
posted by Alicja Bieszyńska on Mar 17, 2017, 8:29 am

In the school's kitchen we have one separate faucet for washing the dishes (it's not pre-rinse spray, but for full washing) and one for filling the pots. They cannot be water efficient, because a...

Last reply: Suzanne Painter-Supplee, LEED AP+ID&C, Mar 27, 2017, 4:54 pm

Use of C&S Commissioning documentation

EBOM-2009 EAc2.1: Existing building commissioning - investigation and analysis
posted by Izabela Kwiecinska on Feb 10, 2017, 6:22 am

Hi Everyone,
We are working on a building that already got LEED C&S certificate in 2012 and now aims to get...

Last reply: Dave Hubka, Feb 10, 2017, 3:56 pm

Can a LEED AP ID+C v4 earn IOc2 EBOM 2009?

EBOM-2009 IOc2: LEED Accredited Professional
posted by Izabela Kwiecinska on Feb 3, 2017, 5:24 am

Hi Everyone,
I am working on LEED...

Last reply: Izabela Kwiecinska, Feb 3, 2017, 10:04 am