Our building will have on-site (and dedicated campus) solar PV, and we're using Trane's Trace program for our ASHRAE 90.1 energy model. However, Trace doesn't seem to have one definitive solar PV...

Dear All,

Good Day !

We have used agricultural waste - rice husk as biofuel in Steam boiler. We have enough documents to claim it in...

We are working on a residential project in climate zone 4A served by water loop heat pump system for heating and cooling. The baseline system is PTAC with fans running continuously throughout the...

Hello everyone,

We are working on campus project with two buildings. For compliance of minimum energy performance, the individual building compliance is required as per multiple buildings...

Hi All,

We are working in LEED NC v2009 project which is having multiple buildings and the project is going Group approach method.

Now we are trying to fill energy performance...

Dear all,

I'm working on modeling of existing library building. I don't have existing glazing details. Do I have to go for unlabeled vertical fenestration (table 8.2 of ASHRAE 90.1...

Hi all,

When selecting the baseline HVAC system type via Table G3.1.1.A, does the fuel source for service water heating also need to be taken into consideration? For example, the proposed...

I'm working on a project that totals approximately 178,000 sf, of which approximately 140,000 sf is office space (3 stories tall), with the other 38,000 sf being conditioned manufacturing space....

Good morning. I am modeling an Elevator with Glass Enclosure with an exterior Curtain Wall and trying to figure out what is the best approach to  (1)accommodate/capture the glass...

Good morning, I'd like to know if anyone can share there best approach to modeling a curtain wall. On the S and W facades, our project has a 22ft tall and 90ft wide curtain wall (shadowbox,...