Log in
Forum » NC-2009 PIf3
Topic

Level of Detail for space usage type table

NC-2009 PIf3: Occupant and Usage Data
posted by Noriko Nagazumi on Oct 10, 2013, 11:08 pm

Hi all,

What level of detail do you generally use for completing the space usage type table? Do you write down room by room? Do you bundle up rooms by floor? Do you bundle up rooms by type...

Last reply: Erika Duran, Oct 11, 2013, 10:19 am

retail portion less than 10% of total SF in mixed-use building

NC-2009 PIf3: Occupant and Usage Data
posted by Courtney Royal on Jul 30, 2013, 12:34 pm

According to Interpretation #10209, issued 7/1/2012, it says that if a non-residential SF of a mixed-used building is less than 10% or no greater than 5,000 SF, it is acceptable for the non-...

Last reply: Courtney Royal, Aug 15, 2013, 9:37 am

Submittal recomendation.

NC-2009 PIf3: Occupant and Usage Data
posted by Daniel Garavito on Jul 29, 2013, 10:04 am

We are currently close to finishing all credit requirements. Do you recomend to submitt al information for review as it is completed or wait to have all ready and submitting it all at once?

Last reply: David Posada, Aug 14, 2013, 5:50 pm

LEED ID+C for a complex Owner/Tenant scenario (Office Space)

NC-2009 PIf3: Occupant and Usage Data
posted by Lida Lewis on Jul 30, 2013, 4:23 pm

I am starting to fill out the paperwork for a new LEED ID+C project for which my LEED Project Boundary will be the full floor of an office building. My client owns the floor, as this is a condo...

Last reply: David Posada, Aug 14, 2013, 5:16 pm

Building Foot Print

NC-2009 PIf3: Occupant and Usage Data
posted by Ahmed Mosa on Jul 29, 2013, 6:06 am

We are currently working in the design of an iconic building that has 2 layers of facade. The exterior shell is just fins that runs around the main environmental envelope but away "10 Meters"...

Last reply: Louise Schlatter, Jul 31, 2013, 3:17 pm

Table PIf3-1 Space Usage Type

NC-2009 PIf3: Occupant and Usage Data
posted by Maggie Edelstein on Jul 25, 2013, 4:04 pm

We have parking spaces in the first floor of our building, for tenants of the project space. The square footage of the parking is not included in the project Gross Floor Area. The parking is...

Last reply: Louise Schlatter, Jul 31, 2013, 3:02 pm

Discrepancy in Peak occupancy and daily average

NC-2009 PIf3: Occupant and Usage Data
posted by Poorva Keskar on Jul 8, 2013, 8:48 am

We have received the review report from the assessor for our office project. It has been stated that- ''The daily average value should typically be higher than the peak value.'' This statement...

Last reply: Poorva Keskar, Jul 26, 2013, 3:35 am

One built-out floor in a CS

NC-2009 PIf3: Occupant and Usage Data
posted by Jason Biondi on Jun 4, 2013, 11:59 am

I am working on a three story office building, that is registered as LEED Core & Shell, where the 2nd floor will be built-out for the owner's company, which means we know the occupancy of the...

Last reply: David Posada, Jul 25, 2013, 2:45 pm

Hi, Our project is 133,624

NC-2009 PIf3: Occupant and Usage Data
posted by Mike D on Jun 20, 2013, 12:14 pm

Hi,
Our project is 133,624 sf. We have completed the form as below

Within the space usage type table, we have 127,832 sf (is this acceptable as it is only a small difference?)
...

Last reply: David Posada, Jul 25, 2013, 2:34 pm

Plant space in Default occupancy

NC-2009 PIf3: Occupant and Usage Data
posted by Mike D on Jun 27, 2013, 6:49 am

We have included all areas of the building within the Default Occupancy Table.
However, there is still the Plant Space we have not included. Can this be omitted? Since default occupancy is...

Last reply: David Posada, Jul 25, 2013, 2:28 pm